Advertisement
Installation
Starting Windows
1. Connect one end of the USB 3.0 Data Link and KM Switch cable to a standard USB port on one of the two computers.
And connect the other end of the USB 3.0 Data Link and KM Switch cable to a USB port on the second computer.
2. The device will automatically start the Smart KM Link software installation on both computers.
3. An option window may appear. Please click on the executive archive "SmartDataLink.exe"
Troubleshooting:
If auto-run is not launched, please follow the steps:
a.
Check both computers are properly connected to the USB 3.0 Data Link and KM Switch cable.
b.
Go to My Computer and double-click the SMARTLINK icon (F:) to start the application. (In this case, SMARTLINK is set
on drive F:)
4. If the "User Account Control" window appears on the screen, Click "Yes" to continue.
Click [Install] to continue...
Advertisement
