Advertisement
Cordex Controller Internal Modem Setup
Summary
This procedure describes the setup of the controller for its Internal Modem.
Setup will be performed using the LCD Touch Screen followed by Web Interface.
Tools Required
• CXC Manual
LCD Touch Screen
1. Tap on Communications
2. Tap on Modem.
to 57600 and Internal Modem
for the Rear Port Device.
4. Scroll to Web Settings.
Set Web Routing to
Rear Modem Port
3. Set Modem Baud Rate
5. Logout and save
changes.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Argus Cordex CXC
Summary of Contents for Argus Cordex CXC
- Page 1 Cordex Controller Internal Modem Setup Summary This procedure describes the setup of the controller for its Internal Modem. Setup will be performed using the LCD Touch Screen followed by Web Interface. Tools Required • CXC Manual LCD Touch Screen 1. Tap on Communications 2.
- Page 2 Note: To set the modem number of ringing, edit the Modem Init String to (via Web interface only): E1MIQ0X4S0=N where: = is the number of rings. Recommended N value is between 0 to 5. Thank you for choosing Argus Technologies...
Need help?
Do you have a question about the Cordex CXC and is the answer not in the manual?
Questions and answers