Advertisement
Quick Links
Summary
This is a general procedure on how to connect a CXC Controller to a computer via a three-wire null modem
cable.
Tools/ Reference Documents Required
• Three Wire Null Modem cable (Pin connections: 2 to 3, 3 to 2, 5 to 5, and shield ground connected on
one side)
• Computer with an DB9 Communication Port (Com 1...x)
• Cordex Controller Manuals
• Hand Tools
Part 1 – Controller Setup
1. Log in and navigate to the Communications > Craft Port
2. Select 57600 from under Baud Rate
3. Select the
from bottom corner
4. Select Web Setting and set to Front Craft Port and then click
Cordex Controller Front Craft Port
.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argus Cordex CXC
Summary of Contents for Argus Cordex CXC
- Page 1 Cordex Controller Front Craft Port Summary This is a general procedure on how to connect a CXC Controller to a computer via a three-wire null modem cable. Tools/ Reference Documents Required • Three Wire Null Modem cable (Pin connections: 2 to 3, 3 to 2, 5 to 5, and shield ground connected on one side) •...
-
Page 2: Alternative Method
LAN/Com Port when you are finished using the Wizard. The Wizard is downloadable from our website www.Argus.ca > Support > Secure Software Downloads > Software. You will need your user name and password to download this file, if you do not have one please call our technical support line 888-462-7487, we will set it up for you. - Page 3 2000 Choose your COMx Give it a name that is meaningful to the site...
- Page 4 2000 Choose your COMx Give it a name that is meaningful to the site Select Properties Press Finish this will now launches the Dialup Connection Select Configuration...
- Page 5 2000 Select Properties Press and then Networking Select Configuration Remove all checks other and TCP/IP (if possible) Highlight TCP/IP and then press Properties...
- Page 6 2000 Press and then Networking Configure as illustrated and press and then Remove all checks other and TCP/IP (if possible) Highlight TCP/IP and then press Properties...
- Page 7 Type any username and enter “1234” for the supervisory access password and “Connect.” To access the Cordex web user interface launch Internet Explorer (Ver.6 or greater) and enter in the address 10.10.10.203 Thank you for choosing Argus Technologies...
Need help?
Do you have a question about the Cordex CXC and is the answer not in the manual?
Questions and answers