Placing The Television In Standby Mode - Samsung CW-29Z418P Owner's Instructions Manual

Remote Control
(depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
➢
This is a special remote control for the visually impaired,
and has Braille points on the POWER, Channel and
Volume buttons.
1 POWER 3 -/--
Used to switch the TV on Used to select a channel
and off. numbered ten or over.
2 Numeric buttons
Press this button, then
Used to select channels "--" symbol is displayed.
directly. Enter the two-digit
channel number.
4 CH MGR % PRE-CH
Used to display channel Used to switch
lists on the screen. repeatedly between
5 TV the last two channels
2 2
Used to return to the displayed.
^ SLEEP
TV mode when it is in 1 1
external input mode. Used to select a
/ preset time interval for
6
Used to increase or automatic turn off.
& SRS
decrease the volume.
7 MENU Used to select the SRS
Used to display the TruSurround XT mode.
on-screen menu or return * P / P
to the previous menu. Used to display the
8 ▲/▼/◄/► next or previous stored
Used to control the channel.
( EXIT
cursor in the menu.
9 INFO Used to exit from any
Used to view the channel display or return to
normal viewing.
information and setting
status you selected. ) MUTE
0 S.MODE Used to switch the sound
Used to select the sound off temporarily. To turn
the sound back on, press
effect.
the MUTE,
! P.MODE
Used to select the
a ENTER
picture effect.
While using the
@ DUAL I-II
on-screen menus, press
Used to select the sound
the ENTER button to
mode.
activate (or change) a
# TURBO
particular item.
Used to select the turbo
b STILL
sound option.
Used to freeze the
$ SOURCE
current picture.
Used to display all of the
c P.SIZE
available video sources.
Used to change the
screen size.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the "+" and "–" ends of
the batteries are inserted correctly or the
batteries are drained.
➢
Do not mix battery types, i.e. alkaline and manganese.
English - 2
Switching the Television On and Off
The mains lead is attached to the rear of the television
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 Press the " I " button (On/Off) on the front of the television.
3 Press the POWER button on the remote control to switch
the television on. The programme that you were watching
last is re-selected automatically. If you have not yet stored
any channels, no clear picture appears. Refer to "Channel
- Auto Store" on page 3 or "Channel - Manual Store" on
page 4.
➢
If the television is initially powered on, several basic
customer settings proceed automatically.
Refer to "Setup - Plug & Play" on page 3.
4 To switch the television off, press the " I " button
(On/Off) on the front of the television.
2
2
1
1
, or
button.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2 To switch the television back on, simply press it again.
➢
You can also switch on by pressing the TV (
P
☛
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the " I "
button (On/Off) on the front (or side) of the television. It is
best to unplug the set from the mains and aerial.
),
/ P , or numeric button.