Triumph Trident Owner's Handbook Manual page 49

Note
In bright sunlight,
settings will be overridden to make sure
that the instruments can be viewed at
all times.
Display Setup–Visible Tray
The Visible Trays menu allows the
selection of the items to be shown in
the information tray.
To select the Visible Trays menu:
• From the Display Setup menu, press
the Up and Down buttons to select
the Visible Trays option.
• Press the Right button to show the
available options.
• Press the Up and Down buttons
until the required information tray
item is highlighted.
• Press the Select button to select/
deselect the information tray.
An information tray item with a
tick next to it will be shown in the
information tray. An information
tray item without a tick next to it
will not be shown in the information
tray.
low brightness
General Information
Display Setup–Gear Shift Ind.
The Gear Shift Ind. option allows the
adjustment of the gear shift indicator.
The engine speed threshold can be
defined and reset, and the gear shift
indicator can be disabled. Once the
engine has been run in (at 1,000 miles),
the Running In option is replaced with a
Default option.
To adjust the engine speed threshold
(RPM) for the gear shift indicator:
• From the Gear Shift Indicator menu,
press the Up and Down buttons to
select User Defined and press the
Select button to confirm.
• Press the Left and Right buttons
to scroll through the numbers to
select each individual number. Press
the Select button to confirm the
number.
• Repeat this procedure with each
individual number until the required
RPM number is shown.
• Click on the Select button to confirm
the RPM number.
49