Table of Contents
Advertisement
2
Select new number.
The call is started and the first call
is put on hold.
Switching between two calls,
hold call
You can switch between two
calls.
1
Establish two calls.
2
"Resume"
The call on hold is resumed.
Establishing a conference
call
Two calls can be connected to a
single telephone conference
call. The calls must be made
from the same mobile phone.
1
Establish two calls.
2
"Conference call"
Hands-free system
General information
Calls that are being made on the
hands-free system can be con-
tinued on the mobile phone and
vice versa.
From the mobile phone to
the hands-free system
Calls that were begun outside of
the Bluetooth range of the vehi-
cle can be continued on the
hands-free system with standby
state or the ignition switched on.
Supra Navigation System Owner's Manual_U (from July '20 Prod.)
3-1. COMMUNICATION
The remote control must be
located in the vehicle for this to
work.
Depending on the mobile
phone, the system automatically
switches to the hands-free sys-
tem.
If the system does not switch
over automatically, follow the
instructions on the display of the
mobile phone. Refer also to the
owner's manual of the mobile
phone.
From the hands-free system
to the mobile phone
Calls that are made on the
hands-free system can in some
cases be continued on the
mobile phone; this depends on
the mobile phone.
Follow the instructions on the
display of the mobile phone.
Refer also to the owner's man-
ual of the mobile phone.
Contacts
General information
Contacts can be created and
edited. The contacts from the
mobile phone are additionally
transferred and displayed. Con-
tact pictures can be displayed, if
the mobile phone supports this
function.
65
3
Advertisement
Table of Contents
