Teleflex MV-2 Series Owner's Manual page 2

NOTICE
NOTICE
Page 2 of 10
Before starting installation, read these instructions and the
engine maker's instructions thorought or incorrect assembly
can result in loss of control and cause property damage or
injury.
Do not substitute parts from other manufacturers. They may
cause a safety hazard which Telefl ex Inc. (USA) cannot
accept responsibility.
Cable installation and connections must be made in accor-
dance with the motor manufacturer's instructions.
To insure best performance and free operation of all
linkages and the remote control is essential. Follow the
manufacturer's recommended procedures for adjustment
and lubrication.
All specifi cations and features are subject to change with-
out notice.
TELEFLEX MARINE HIGHLY RECOMMENDS THE INSTALLATION,
AND USAGE OF AN ENGINE SHUT OFF SWITCH (SOMETIMES
CALLED A "KILL" SWITCH) AS AN IMPORTANT EMERGENCY SAFETY
FEATURE FOR BOATS. THIS SWITCH SHOULD BE CONNECTED BY
A CORD TO THE BOAT DRIVER. SHOULD THE DRIVER BE THROWN
FROM THE HELM POSITION, THE ENGINE WILL AUTOMATICALLY
SHUT OFF.
THIS SHUT OFF SWITCH IS NOT A STANDARD PART OF THE CON-
TROL YOU ARE USING. IT CAN, HOWEVER, BE OBTAINED FROM
MOST MARINE DEALERS AND DISTRIBUTORS.