Pelsue FT-C70 Product Manual page 16

5.0 - Product Operation (continued)
3. #FT-C70 Composite Fall Arrest Tower in RESCUE MODE:
In the event of a fall, the Model #FT-C70 can be used as a rescue device utilizing the following directions;
a. In the case that a person or persons have fallen, allow them to come to a rest before performing a rescue
(Fig. #5.2e).
b. At the base of the tower, the leveling screws can be adjusted in whichever direction is more suitable for rescue
(Fig. #5.2f).
c. Unscrew the peg on the side of the desired direction to lower the tower while screwing in the opposite peg
(Fig. #5.2f).
d. The tower can be offset a maximum of 23 degrees from the vertical position (Fig. #5.2g).
e. If not employing a 2 or 3 way SRL System, the #FT-C70 is designed to accept a Pelsue Pole Hoist for rescue
capability.
Figure #5.2e: #FT-C70
Completely Vertical
Page 16
!WARNING! - The #FT-C70
tower must not be used as
an anchorage for a fall arrest
device while deployed within its
"Rescue Mode" configuration
Person or Persons
Leveling
Pegs
Figure #5.2f: #FT-C70
Adjusting Leveling Pegs
23º Max
Figure #5.2g: #FT-C70
Completely Tilted
500714-001 - Product Manual - #FT-C70 Carbon Fiber Fall Arrest Tower - Revision 02 - 2015-03-06