Clocking Gearbox Housing - T.J.M. 9000lb Fitting Instructions Manual

89676 06-07-2011
Product:

CLOCKING GEARBOX HOUSING

Winch gear housing can be clocked in 10 ways allowing the user to position the clutch lever at 10 equal distant
locations (0°, 36°, 72°,
Ensure you have a clean work area before
commencing.
1. Remove the two allen head cap screws (circled)
holding the tie rod on the gearbox side of the
winch.
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
9000lb
., 360°).
Gearbox @ 0°
ELECTRIC WINCH
9500lb
Page 6 of 17
12000lb
Gearbox @ 72°
Diagram 1.