Potential Safety Hazards; Electrical; Safety Standards; Ec Directive 89/336/Eec - ABB ControlMaster CM15 Commissioning Instructions

C O N T R O L M A S T E R C M 1 5 | U N I V E R S A L P R O C E S S I N D I C ATO R , 1/8 D I N | C I/C M 1 5 - E N R E V. A

Potential safety hazards

Electrical

WARNING
To ensure safe use when operating this equipment,
the following points must be observed:
• Up to 240 V AC may be present. Be sure to isolate
the supply before removing the terminal cover.
• Normal safety precautions must be taken to
avoid the possibility of an accident occurring
when operating in conditions of high pressure
and/or temperature.
Safety advice concerning the use of the equipment
described in this manual or any relevant Material
Safety Data Sheets (where applicable) can be
obtained from the Company, together with servicing
and spares information.

Safety standards

This product has been designed to satisfy the
requirements of IEC61010-1:2010 3
Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use' and
complies with US NEC 500, NIST and OSHA.

EC Directive 89/336/EEC

Electrical – In order to meet the requirements of the EC
Directive 89/336/EEC for EMC regulations, this
product must be used in an industrial environment.

End-of-life disposal

The indicator contains a small lithium battery that
must be removed and disposed of responsibly in
accordance with local environmental regulations.
The remainder of the indicator does not contain
any substance that causes undue harm to the
environment and must be disposed of in
accordance with the Directive on Waste Electrical
and Electronic Equipment (WEEE). It must not be
disposed of in Municipal Waste Collection.
5
rd edition 'Safety