Subscribe to Our Youtube Channel
Related Manuals for Ozone GREY 30000
Summary of Contents for Ozone GREY 30000
- Page 1 Read the instructions carefully before using this device GREY 30000 (HE-161A) INDUSTRIAL OZONE GENERATOR USER MANUAL Read the instructions carefully before using this device...
- Page 2 WARNING This air unit is not a medical device. Do not stop or modify any treatment or medication programs without consulting your doctor. Excessive ozone concentrations can irritate the mucous membranes or the respiratory tract. CAUTION DANGER OF INJURY BY ELECTRIC...
-
Page 3: What Is Ozone
WHAT IS OZONE? Ozone (O3) is a toxic gas with a typical odor, which is a normal component of the Earth’s atmosphere. Ozone is deliberately manufactured for various industrial purposes; it is produced naturally from oxygen by ultraviolet radiation, electric discharge, e.g. -
Page 4: Technical Specification
TECHNICAL SPECIFICATION Model: GREY 30000 (HE-161A) Input voltage: AC 220-240V/50-60Hz Energy consumption: 240 W Ozone plates: 104 x 50 mm, 6 pcs Air volume: Max 150 CFM (4.20 M3/min) Active oxygenation: 30 000 mg/h Noise level: 45 dB Dimensions: 260 x 205 x 180 mm Weight: 4.5 Kg... - Page 5 USING THE GREY 30000 DEVICE (front view) Operation timer: U sed to set the device’s operating period (ozone production) for up to 3 hours. Switching between low and high output: H igh output at 30,000 mg, low output at 15,000 mg.
- Page 6 (rear view) Fuse: A replaceable fuse (2A, length 0.79 inches) is located here. Power supply: P ower supply connector, 220V-240V.
-
Page 7: Follow These Steps
3 hours. At the end of the set operating period, the device switches off. Ozone has very strong oxidizing effects , and at higher concentrations can damage surfaces which have a tendency to corrode, as well as bring about the accelerated degradation of some plastics and rubber products. - Page 8 ● There are no cracks in the plates, and each plate is aligned with the rear part of the unit. ● It is important that the ozone generator is properly earthed, in order to prevent injury by electric current. ● The fuse is installed correctly and in good condition.
-
Page 9: Maintenance
MAINTENANCE If the device does not produce enough ozone for a longer time, and it is therefore not efficient enough, it is necessary to replace the ozone plates. They are usually changed after 6000 hours of operation. To clean the plate, first, turn off the power and unplug it. Remove the upper cover unit. - Page 12 Read the instructions carefully before using this device GREY 30000 (HE-161A) INDUSTRIAL OZONE GENERATOR USER MANUAL Read the instructions carefully before using this device Version 20.05.2020...
Need help?
Do you have a question about the GREY 30000 and is the answer not in the manual?
Questions and answers