Table of Contents
Advertisement
1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer's
cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card's bus
connector with the selected PCIe slot on the
motherboard. Push the board down firmly.
5. Replace the slot bracket's holding screw to secure the
card.
6. Replace the computer cover and reconnect the power
cord.
2.2 Driver Installation
Please make sure the hardware is installed before
installing the driver.
If you cannot read the contents of the disk, please go to
the following address to download the driver according to
the product model:
1. Insert the provided CD into your disk drive.
2. Run the "Autorun.exe", click the "Drivers", and select
the appropriate driver version.
http://www.inateck.com/support
4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KTU3FR-5O2I and is the answer not in the manual?