STORAGE:
•
Remove Handle.
•
Apply a thin fi lm of light oil or rust-preventive to all bare steel areas.
•
Store in a clean, dust-free, dry, dampness free area preferably covered with plastic sheeting.
MAINTENANCE:
NOTE: Maintenance should be performed before each use.
•
Clean dirt and debris from Rollers Mandrel Dies.
•
Check tightness of all hardware.
•
Check operation for binding. Lubricate Bearing Blocks through the Zerk fi ttings periodically with medium bodied chassis grease.
•
Add grease to the drive gears.
OPTIONAL METALWORKING ITEMS:
#28060P – The available Adjustable Guide Fence guides along the edge of a metal panel and allows you to make straight line beads perfectly straight
and parallel
#51088 – Shrinker/Stretcher Set
#13475 –
Eastwood Electric Metal Shears
#11797 –
Throatless Shear
#14042 –
Versa Bend Sheet Metal Brake
#20254 – Eastwood 24" Slip Roll