Advertisement
The Eastwood Bead Roller is a professional metal fabrication tool for producing strengthening ribs in panels used in creating replacement fl oor pans, fi rewalls, trunk fl oors,
inner fenders, etc. It can also be used for creating decorative custom designs in door panels, dashes, channels, fl anges, and much more with the range of included beaded
mandrels. The gear-driven design delivers maximum forming power while requiring minimal handle force for maximum accuracy.
INCLUDES
(1) 17" Throat Bead Roller Frame
(1) Crank Handle
(6) Complete Sets of Mandrel Dies
- 1/16", 1/8" & 1/4" Flanging Mandrels
- 1/4", 3/8" & 1/2" Bead Forming Mandrels
SPECIFICATIONS:
•
Maximum material working thickness: Steel = 18 Gauge, Aluminum = 16 Gauge
•
Maximum panel width (working from center) = 34"
SAFETY INFORMATION
WARNING!
THIS TOOL HAS ROTATING ROLLERS AND GEARS WITH AMPLIFIED LEVERAGE WHICH CAN QUICKLY CAUSE SEVERE INJURY!
KEEP FINGERS AND HANDS AWAY FROM MOVING PARTS WHEN OPERATING.
READ INSTRUCTIONS!
•
Read this entire manual before set up and use.
•
Keep this manual in a safe location as it will be necessary to refer to it often.
WARNING!
Wear work gloves and protective clothing. Sheet metal will often have sharp edges which can cause cuts to hands, arms and face
•
•
Frequently inspect moving parts and structure of the Bead Roller. If damage is observed, discontinue tool use immediately.
•
Make sure the Bead Roller Frame is securely mounted in a minimum 4" (6" & larger strongly recommended) vise properly fastened to a solid work
surface before use. IMPORTANT NOTE: The Eastwood Bead Roller is moderately heavy, have a helper available when installing in the vice.
Wear appropriate eye protection
•
.
Advertisement
