How To Assemble The Stand-Base (Depending On The Model) - Samsung PS50A556S2F User Manual

Moving to the remembered position
1 Complete Step 1 of Entering the menu.

Pressing a Color (Red, Green, Yellow) button moves the auto wall
mount to the saved position.
You can move the wall mount to one of the 3 pre-set positions

by pressing the Red (Position 1), Green (Position 2) or Yellow
(Position 3) buttons.
If you adjust the positon after moving to a pre-set position, the

position display will disappear.
For installation, refer to the Installation Manual provided with the wall

mount.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized

installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building

materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ or WISELINK is operating.

 42 inches model is not compatible with the older wall mount model (WMN5090A).
How to assemble the Stand-Base
Using the 6 screws for securing the stand base and the
monitor, firmly attach the monitor to the stand base.
(The exterior of the set may be different than the picture.)
Warning
Firmly secure the stand to the TV
before moving it, as the stand may
fall and could cause serious injury.

Two or more people should carry
the TV. Never lay the TV on the
floor because of possible damage
to the screen.
Always store the TV upright.
English - 5
Auto Wall-Mount
Position 1
►
►
Position
Adjust
(depending on the model)
In case of installing your TV on the wall,
close the cover (1) on the stand-base
connection part using two screws for
hiding.
►
►
1 2 3
Save Center
INFO