Before Installation; Installing The Controller Card - Supermicro AOC-S3216L-L16iT User Manual

Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
AOC-S3216L-L16iT Controller Card User's Guide
При обращении используйте промокод AND-PDF и получите скидку.
3-2

Before Installation

To install the controller card properly, follow the steps below.
Prior to Installation
1. Power down the system and unplug the power cord.
2. Use industry-standard anti-static equipment (such as gloves or wrist strap)
and follow the precautions on page 3-1 to avoid damage caused by ESD.
3-3

Installing the Controller Card

Depending upon which system configuration is used, a riser card may or may not
be required to install the AOC-S3216L-L16iT.
Installing the Controller Card
1. Power down the system, remove the power cords from the rear of the power
supply and remove the system cover.
2. Verify that your controller card is equipped with the correct length of PCIe slot
mounting bracket for your system. The AOC-S3216L-L16iT controller card in-
cludes a low-profile PCIe mounting bracket. However, if your system features
full-height PCIe slots, replace the low-profile bracket with a full-height bracket.
3. Insert the controller card into a x8 PCI-E slot.
4. Connect the mini SAS HD cables from the controller card to either the direct
attached storage target devices or the cable sockets on the backplanes.
5. The cable latch will click into the locked position when connected properly.
6. Replace the system cover, plug in the power cord and power up the system.
3-2