Advertisement
Table of Contents
Guidance for Use
1. Select correct size of AquaNASE®
nasal cannulae.
2. Apply AquaNASE® nasal cannulae and
secure neck strap as shown overleaf.
3. Insert humidification chamber onto heater
plate and spike water bag.
4. Attach circuit as shown a-d.
2
*This guidance should be read in conjunction with the IFU supplied with the specific Breathing Circuit, Heater Humidifier, AquaNASE® nasal cannulae and the Flow Driver.
*
1
4d
High Flow Oxygen
Therapy – FD140
5. Connect heater cable and
temperature probes.
6. Turn on heater and select invasive mode.
7. Set flow at 20L/min and select prescribed
FiO
for 2 minutes.
2
8. Increase flow to max 70L/min as required
monitoring SpO
FD140 Flow Driver
(Supplied
Separately)
5
Heater Humidifier
(Supplied
Separately)
and respiratory rate.
2
AquaVENT®
FD140
0
5 10 15 20 25
PAP
0
2
8
7
4a
4b
4c
3
6
PMA_AMFD140_HFOT_DSIFU_v1 UK 01/12/17_15639
Advertisement
Table of Contents
Related Manuals for Armstrong Medical AquaNASE
Summary of Contents for Armstrong Medical AquaNASE
- Page 1 AquaVENT® FD140 Separately) 5 10 15 20 25 Heater Humidifier (Supplied Separately) *This guidance should be read in conjunction with the IFU supplied with the specific Breathing Circuit, Heater Humidifier, AquaNASE® nasal cannulae and the Flow Driver. PMA_AMFD140_HFOT_DSIFU_v1 UK 01/12/17_15639...
- Page 2 Step 4 Adjust the ends of the elasticated strap to secure the device. Armstrong Medical Wattstown Business Park, Newbridge Road, Coleraine, BT52 1BS, Northern Ireland. T +44 (0) 28 7035 6029 F +44 (0) 28 7035 6875 info@armstrongmedical.net...
Need help?
Do you have a question about the AquaNASE and is the answer not in the manual?
Questions and answers