BALZER Field Floater 1325 Extension User Manual page 38

Operation
BLEEDING INSTRUCTIONS FOR TRIDEM AUTO STEERING
1. Attach jumper hose #72182 to
2. Pressurize hydraulic line from tractor
3. Open ball valve to
4. Open the
("F" and "J" ports)
come out. Then close bleeder screw.
5. Open the ("G" and "K" ports)
come out. Then close bleeder screw.
6. Close ball valve to
7. Relieve all pressure
8. Attach jumper hose #72182 to
9. Pressurize hydraulic line from tractor
10. Open ball valve to
11. Open the
("I" and "D" ports)
come out. Then close bleeder screw.
12. Open the
("H" and "E" ports)
come out. Then close bleeder screw.
13. Close ball valve to
14. Move jumper hose #72182 from ("
15. Open ball valve to
16. Open the
("H" and "K" ports)
come out. Then close bleeder screw.
17. Open the
("I" and "J" ports)
come out. The cylinder rod will retract in halfway. Then close bleeder screw.
18. Close ball valve to
("C" port)
(YELLOW marked hose).
("B" port).
bleeder screw on the cylinders one at a time until no air bubbles
bleeder screw on the cylinders one at a time until no air bubbles
( Cylinder will stroke out
("B" port).
from the hydraulic line from the tractor
("C" port)
(YELLOW marked hose).
("B" port).
bleeder screw on the cylinders one at a time until no air bubbles
(Cylinder will stroke out)
bleeder screw on the cylinders one at a time until no air bubbles
("B" port).
B" port
("A" port).
bleeder screw on the cylinders one at a time until no air bubbles
bleeder screw on the cylinders one at a time until no air bubbles
("A" port).
Instructions Continued on Next Page
and on the rear axle hydraulic block.
("B" port)
)
(YELLOW marked hose).
and on the front axle hydraulic block.
("B" port)
) to ("A" port) on the front axle hydraulic block.
38
BALZER
INC.