Installation
1
Attaching the finials to the fixture
frame
□
Screw the shorter end of nipple A (F) about 8 mm into
the bushing (G).
□
Place the decorative cap (E) over nipple A (F).
□
Screw a finial (D) onto nipple A (F).
□
Screw nipple B (J) about 8 mm into the bottom ball (I).
□
Screw a finial (D) onto nipple B (J).
3
Connecting the electrical wires
□
Wrap the ground wire from the fixture around the ground screw (BB) on the cross bar (AA). Use a wire connector (EE)
to connect the ground wire from the fixture to the ground wire from the outlet box.
□
Use a wire connector (EE) to connect the white wire from the fixture to the white wire (neutral wire) from the outlet
box.
□
Use a wire connector (EE) to connect the black wire from the fixture to the black wire (live wire) from the outlet box.
□
Wrap the three wire connections with electrical tape for a more secure connection.
□
Position the wires back inside the outlet box.
2
Attaching the cross bar to the
outlet box
□
Screw the mounting screws (CC) into the cross bar
(AA) so that the threads face out.
□
Mount the cross bar (AA) to the outlet box (not
included) using the outlet box screws (DD).
□
Make sure the threads of the mounting screws (CC)
are facing out when the cross bar (AA) is attached to
the outlet box.
6