Page 1
2. When the PC is booted up start your browser (Explorer or Firefox or whatever’s your poison) 3. On the address line of the browser enter 192.168.1.1 and press <enter>: The M18P1 login page should show 4. Enter admin and admin and click on Ok Solwise Ltd, www.solwise.co.uk, sales@solwise.co.uk...
Page 2
5. The first screen is the Setup Wizard. Click on Next to goto the first setup page 6. Select Bridge mode and click on Next Solwise Ltd, www.solwise.co.uk, sales@solwise.co.uk...
Page 3
7. On the NTP page select the settings suitable for your local. Then click on Next 8. On the LAN Interface Setup I suggest you don’t, at this point, change the address of the unit. Click on Next Solwise Ltd, www.solwise.co.uk, sales@solwise.co.uk...
Page 4
9. Don’t worry about WAN Interface Setup either so just click on Next 10. By default the wifi mode is AP mode. So just change the SSID to whatever you want. The rest of the settings shouldn’t need to be altered. Then click on Next. Solwise Ltd, www.solwise.co.uk, sales@solwise.co.uk...
Page 5
11. You now might wish to alter the wifi security 12. Now click on Finshed. Wait for the unit to reboot. Solwise Ltd, www.solwise.co.uk, sales@solwise.co.uk...
Page 6
15. Now click on Apply Changes 16. Configuration for AP mode is now complete. Now you can unplug your PC from the M18P1 and then connect both devices to your network. Solwise Ltd, www.solwise.co.uk, sales@solwise.co.uk...
Need help?
Do you have a question about the M18P1 Series and is the answer not in the manual?
Questions and answers