Download  Print this page

Checking The Signal Information; Upgrading The Software - Samsung LE32A557P2F User Manual

Series 5.
Hide thumbs

Advertisement

Table of Contents

Checking the Signal Information

You can get information about the signal status.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER
button.
2. Press the
▲ or ▼
ENTER
button.
. Press the ▲ or ▼ button to select "System", then press the
ENTER
button.
. Press the ▲ or ▼ button to select "Signal Information", then press the ENTER
. Press the EXIT button to exit.
If the signal status is poor, the "No signal." message is displayed.

Upgrading the Software

To keep your product up-to-date with new Digital Television
features then software upgrades are periodically broadcast as
part of the normal Television signal.
It will automatically detect these signals and display the
software upgrade banner. You are given the option to install the
upgrade.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER
button.
2. Press the
▲ or ▼
ENTER
button.
. Press the ▲ or ▼ button to select "System", then press the
ENTER
button.
. Press the ▲ or ▼ button to select "Software Upgrade",
then press the ENTER
. Press the ▲ or ▼ button to select "Software Information",
"Manual Upgrade" or "Standby Mode upgrade".
Press the ENTER
Software Information
Press the ENTER
version information, press the ENTER
To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
Manual Upgrade
Press the ENTER
Standby Mode Upgrade: On / Off
Press the ENTER
by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is
automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software
upgrade is completed.
. Press the EXIT button to exit.
button to select "Setup", then press the
button to select "Setup", then press the
button.
button.
button, then the current software version is shown. To display the software
button to search for new software from the currently broadcasting channels.
button. To continue software upgrade with master power on, Select On
button again.
English - 2
DTV
Signal Information
Service: ?
Service ID:0000
Multiplex: ? (TSID 0000, ONID 0000)
Network: ? (ID 0000)
bit error level:
10
Signal Strength:
0
Move
Enter
Return
button.
DTV
System
Product Information
Signal Information
Software Upgrade
Reset
Move
Enter
DTV
Software Upgrade
Software Information
Manual Upgrade
Standby Mode upgrade : On
Move
Enter
Return
Return
Return

Advertisement

Table of Contents

   Also See for Samsung LE32A557P2F

   Related Manuals for Samsung LE32A557P2F

Comments to this Manuals

Symbols: 0
Latest comments: