Download  Print this page

Plug & Play - Samsung LE32A557P2F User Manual

Series 5.
Hide thumbs


Table of Contents
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
The Screen Saver is activated if there is no remote control key
input for longer than 1 minute while "Plug & Play" is running.
The Screen Saver is activated if there is no operating signal for
longer than 15 minutes.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals.
Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming
DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some
1. Press the POWER
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER
. Press the ◄ or ► button to select "Store Demo" or "Home Use", then the ENTER
We recommend setting the TV to "Home Use" mode for the best picture in your home
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to "Store Demo" mode and you want to return to "Home Use"
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds.
. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER
Please check that the antenna cable is connected correctly.
. Select the appropriate country by pressing the▲ or ▼ button.
Press the ENTER
. The message "Some DTV functions may not be available. Digital Scan?" is displayed.
Press the ◄ or ► button to select "Yes" or "No", then press the ENTER
Yes: First an ATV search is performed and then a DTV ch. auto search is performed.
No: Only an ATV search is performed.
This function is supported for all countries except for the following countries: France, Germany,
Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.
. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER
The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV. After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER
For detailed descriptions about DTV channel update, refer to page 31 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
. Press the ENTER
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► button.
Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ button.
You can also set the "Month", "Day", "Year", "Hour" and "Minute" by pressing the number buttons
on the remote control.
button on the remote control.
button to confirm your choice.
button to confirm your choice.
button at any time to interrupt the memorization process.
English - 11
Plug & Play
Start Plug & Play.


Table of Contents

   Also See for Samsung LE32A557P2F

   Related Manuals for Samsung LE32A557P2F

Comments to this Manuals

Symbols: 0
Latest comments: