TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
When "TV Speaker" is set to "Off", you can operate only "Sound Select" (in PIP mode) in Sound
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Selecting the Sound Mode
You can set the sound mode in the "Tools" menu.
When you set to "Dual I-II", the current sound mode is displayed
on the screen.
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Dual I-II".
. Press the ◄ or ► button to select required option.
. Press the ENTER
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in Analogue TV mode.
Connecting headphones (Sold separately)
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" and "Sound Select"(in PIP mode) in
Prolonged use of headphones at a high volume may damage your
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
- and MUTE buttons do not operate when the "TV Speaker" is set to Off.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO ↔ STEREO
MONO ↔ DUAL 1
English - 2
SRS TS XT
TV Side Panel