Page 1
Absolute al tude above the sea level (adjustable) The al tude in rela on to the takeoff. It is set to 0 when you turn on Jb-L20 Are the maximum ascent and descent recorded while flying. V stands for ver cal.
Page 2
Knowing the bu ons, exploring menus – se ng up your Jb-L20. (Video available on www.jbvario.com) To prevent accidentally change of status, while in "FLYing MODE" you need a long press on the bu ons of about 2.5 seconds to: •...
filter will be ac vated again. This is done to cut out temporary “shaking”. This means also that if you set Jb to +0.1 the first thermal will be detected a er 10 cm of varia on , but the beep will be produced a er 20 cm...
Page 4
Factory Reset: if you Jp on that, the instrument is reset to factory values. Charging the Jb-L20 Simply connect the instrument to a micro USB cable… The Jb-L20 will be charged in about 3 hours if the ba ery is completely flat.
Firmware update Once the Jb-L20 is connected to the USB cable the charge will start, but by USB is also possible to update the firmware. To avoid complica on we created a method that does not require drivers installa on. That’s the u lity of the bu on firmware update.
Page 6
+0.1 m/sec, sinking thresholds -2 m/sec, sound type RELAX, responsiveness FAST, unit METERS, Language English. • Aluminum D shape hook to secure Jb-L20 in a fast way. • Adhesive Velcro and Velcro strap are provided to set the instrument on the paraglider risers or wherever you prefer.