Tone Generator - Platinum Tools Cable Prowler TCB300 Quick Start Manual

Tone Generator

•
Power on the Cable Prowler.
•
Use the left or right arrow buttons to select the tone generator icon
and press the enter button.
•
The cable prowler will automatically activate the tone generator upon
entering the tone generator menu.
•
Connect your cable to either the RJ45 jack or coax connector located on the
top of the Cable Prowler.
•
To switch between network and coax cables, press the coax cable/RJ45
soft key
•
Press the up or down arrow buttons to select tone cadences 1 thru 4.
•
Press the left or right arrow buttons to select which pin or pair to place the
tone.
•
Use a tone probe alongside the cable or at the end of the cable to hear an
audible tone.
6
Distribution:
PureLink GmbH
/ .
Cable Prowler Quick Start Guide
Available from B2B Online Portal