Product Setup; Switch Setup - D-Link GO-SW-5E Quick Installation Manual

PRODUCT SETUP

SWITCH SET-UP
Internet Router
LED
GO-SW-5E & 8E
Step 1
Connecting the power adapter
Plug the power adapter into a free wall socket, then plug the other
end of the power adapter cable into the power port of the GO-SW-
5E/8E. The power LED will light up, confirming that the device is
powered up successfully.
Step 2
Connecting your Network Devices
Use a LAN cable to connect your network device to one of the
Ethernet ports of GO-SW-5E or GO-SW-8E.
Step 3
Determine that the Switch is Powered On
The Power LED indicator light is green when the Switch is receiving
power; otherwise, it is off.
Determine that the Network Devices are Connected
The Link/Act LED indicator light is green when the port is connected to a
device.
The green indicator blinks as data is transmitted or received.
3