Summary of Contents for Middle Atlantic Products L5 Series
Page 1
• 33” w / Flat Top • 43” w / Flat Top THANK YOU Thank you for purchasing the L5 Series AV Ready Lectern. PRODUCT FEATURES • Quick and easy customization • Open frame design makes easier work, with built-in power and provisions for cable management and thermal management •...
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. WARNING: A WARNING ALERTS YOU TO A SITUATION THAT COULD RESULT IN SERIOUS PERSONAL INJURY • Keep these instructions. OR DEATH. • Heed all warnings. CAUTION: A CAUTION ALERTS YOU TO A SITUATION THAT MAY RESULT IN MINOR PERSONAL INJURY OR •...
QTY: 5 (33” AND 43” MODELS ONLY) CONFIGURATION OPTIONS The L5 Series Lectern offers the ability to customize the location of the following items: • Drawers - Refer to page 5. • Inner AVIP Panel - Refer to page 7.
SWAPPING THE DRAWER LOCATIONS (OPTIONAL) If desired, refer to the following steps to swap the location of the camera drawer with the accessory drawer. Camera Nuts (4 Per Side) 1) Slide camera drawer out from Drawer 10-32 unit and disengage from outer Inner Drawer drawer slides.
Page 6
SWAPPING THE DRAWER LOCATIONS (OPTIONAL) (CONTINUED) 4) Slide accessory drawer out from unit and disengage from drawer slides. (FIGURE C) NOTE: Pull lever up to release drawer from drawer slides. (FIGURE C) 5) Remove (2) screws from both drawer mounting brackets and remove brackets from frame. (FIGURE C) 6) Install both drawers in reverse manner on left or right side.
INNER AVIP PANEL REMOVAL / INSTALLATION (OPTIONAL) If desired, refer to the following steps to swap the location of the inner AVIP panel from the right to left side. 1) Remove (3) screws securing inner AVIP Panel to frame and remove from frame. (FIGURE D) 2) Install inner AVIP panel in reverse manner using either mounting location as shown.
CABLE SHELF REMOVAL / INSTALLATION (OPTIONAL) If desired, refer to the following steps to swap the location of the cable shelf from the left to right side. 1) Remove (3) screws securing cable shelf to frame and remove from frame. (FIGURE E) 2) Install cable shelf in reverse manner using either mounting location as shown.
CONNECTIVITY PANEL REMOVAL / INSTALLATION (OPTIONAL) If desired, refer to the following steps to swap the location of the connectivity panel from the left to right side. 1) Remove (4) screws securing connectivity panel to frame and remove from frame. (FIGURE G) Door Gap 2) Install connectivity panel in reverse manner...
KEYBOARD DRAWER REMOVAL / INSTALLATION NOTE: It is recommended to remove the keyboard drawer for ease of assembly. Keyboard Drawer 1) Slide keyboard drawer out from unit and disengage from drawer slides. (FIGURE H) NOTE: Press tab to release drawer from drawer slides. (FIGURE H) 2) Install drawer in reverse manner.
FRONT DOOR INSTALLATION 1) Install front door(s) on pre-installed hinges. (FIGURE M) 2) TRADITIONAL MODELS ONLY: Wood Install handle on keyboard drawer using Screws (2) (2) M4 x 25 Pan Head Screws. (FIGURE M) 3) Install (2) rubber bumpers per door locations shown.
SIDE PANEL INSTALLATION 1) Install side panels by placing the (6) pre-installed hooks on the panel into the (6) slots on the frame. (FIGURE P) 2) Install (2) wood screws to secure each panel to frame in locations shown. (FIGURE P) NOTE: Make sure side panels are fully installed.
Use of a flexible Monitor Mount Locations (4) extension or ratchet will ease install of front two screws. 1) If installing optional Middle Atlantic Products MMB-1x1-12 monitor mount, drill out one of the counterbored holes on underside of worksurface using a 1/2”...
TOP SHELF INSTALLATION (FLAT TOP MODELS ONLY) 1) Install top shelf to top shelf frame using (6) wood screws. (FIGURE U) Wood Screws (6) Top Shelf Frame Top Shelf FIGURE U 2) Install assembled top shelf frame to side panels using (2) wood screws per side. (FIGURE V) Wood Screws (2) Assembled Top Shelf Frame FIGURE V (Model L5-FLATFR-43 Flat Style Shown)
DOCUMENT CAMERA DRAWER PANEL INSTALLATION (33” AND 43” MODELS ONLY) 1) Install storage drawer panel using (6) wood screws. Handle (FIGURE Y) 2) TRADITIONAL MODELS ONLY: Install handle using (2) M4 x 25 pan head screws. Pan Head Screw M4 x 25 (2) (FIGURE Y) Drawer Panel FIGURE Y...
REAR PANEL INSTALLATION 1) Install rear panel by placing the pre-installed hooks into the slots on the frame. (FIGURE AA) Hooks Rear Panel Slots Rear Panel FIGURE AA (Model L5-FLATFR-43 Flat Style Shown) Page 18...
WARRANTY Middle Atlantic Products (the "Company") warrants the L5 Series AV Ready Lectern metal frame to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product. Middle Atlantic Products (the "Company") warrants the L5 series wood finishing kit to be free from defects in material or workmanship under normal use and conditions for a period of (7) seven years from date of shipment by the Company.