Declaration Of Conformity - AEG ACS18B30 Original Instructions Manual

Conforms to all regulatory standards in
the country in the EU where the product is
purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste
electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their
life must be collected separately and returned to
an environmentally compatible recycling facility.
Do not dispose of used battery packs in the
household refuse or by burning them. Hand them
over to applicable collection points.
The following signal words and meanings are intended to explain
the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
32
ENGLISH

DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product
described under "Technical Data" fulfills all the relevant
provisions of the directives 2011/65/EU (RoHs), 2014/30/
EU, 2006/42/EC, 2000/14/EC, 2005/88/EC, and the following
standards have been used:
EN 60745-1:2009+A11:2010
EN 60745-2-13:2009+A1:2010
EN 55014-1:2017
EN 55014-2:2015
EN IEC 63000:2018
Measured sound power level
Guaranteed sound power level 99 dB(A)
Conformity assessment method to Annex V Directive 2000/14/
EC amended by 2005/88/EC
Notified body, 0197 TÜV Rheinland LGA Products GmbH;
Tillystraße 2 D - 90431 Nürnberg, Germany has carried out
EC type approval, and the certificate number is : BM 50367224
0001
Winnenden, 15 February 2019
Alexander Krug
Managing Director
Authorised to compile the technical file.
Techtronic Industries GmbH
Max-Eyth-Straße 10,
71364 Winnenden,
Germany
32
94.2 dB(A)