Power Off; Connecting With Computer; Date And Time Setting; Care And Maintenance - Technaxx TrendGeek TG-125 User Manual

Power off

Press the On/Off button. If the device is recording a video, the video file
will be saved. The blue LED and the red LED blinks five times
simultaneously, then the device shut down. Note: If the device is in the
standby status and there is no operation for five minutes the device will
shut down automatically. If the battery is too low, the blue LED shines
and the red LED blinks eight times, then the device turns Off.

Connecting with computer

Date and Time setting (while connected with computer)
1. Create a new text file named time.
→go to Desktop →click on the right mouse button →click on new →click
on Text Document →now you can change the file name to time
2. Open the file time and write the date and the time in the following way:
3. Now save the file.
4. Copy the file on the MicroSD card.
5. Now you can eject the USB device.
Note: If you change the batteries, the date and time must be set again.

Care and maintenance

Clean the device only with a dry or slightly damp, lint-free cloth.
Do not use abrasive cleaners to clean the device.
This device is a high-precision optical instrument, so in order to avoid
damage, please avoid the following practice:
●
Use the device in ultra-high or ultra-low temperature.
●
Keep it or use it in moist environment for long.
●
Use it in rainfalls or in water.
●
Deliver or use it in strongly shocking environment.
YYYY-MM-DD HH:MM:SS
(Example → 2018-12-31 23:59:59)
Please connect the Mini-USB cable
with the device as shown in the left
picture. Please connect the other
end with the computer. If the
device is connected
computer, it enters the USB-Mode
automatically. The red LED shines
and the blue LED blinks.
to the