Toro REELMASTER 4500-D Operator's Manual page 23

LUBRICATION
Areas to lubricate are pictured in figures 23–25.
Use No. 2 lithium-based grease. Also, grease
the fitting on the Reel Control Valve (not
shown), under the right console.
Note: Remove the plastic caps over the fittings
on the floating- or fixed-head kit pivots and
replace them after greasing (Fig. 24).
Figure 22
Lift Arms (5 fittings)
Figure 23
Rear Axle (3 fittings)
Figure 24
Floating or Fixed Head Kit Pivots
(Floating Head Kit Shown)
Figure 25
Reel & Roller Bearings