Table of Contents
Advertisement
Maintenance
Long Term
1
Allow the engine to fully cool down.
2
Drain the fuel.
The fuel can be drained through the carburettor by removing the float bowl drain plug.
Ensure you use a suitable fuel container to drain the petrol into. (This is a slow process, it is
advisable to run the fuel level down as low as possible before draining).
3
Follow the cleaning instructions in the 'Cleaning' section.
4
Follow the maintenance section and check, service or replace serviceable items if required.
Visually inspect the machine and replace or repair any worn parts.
5
Make sure all moving parts are lubricated with a light silicone based spray or grease.
Drain and replace with new engine oil.
6
7
Remove the spark plug and pour 1 teaspoon of fresh engine oil down the cylinder bore. Cover
the spark plug hole with a lint free clean cloth, ensuring no dirt or debris falls into the cylinder
chamber and gently pull the recoil starter handle to coat the cylinder bore with the fresh oil.
Refit the spark plug.
Preparation To Re-Use
1
Check oil level before using.
2
Check spark plug is inserted correctly.
3
Fill engine with fresh unleaded petrol that has not been stored for periods of more than 30 days.
www.hyundaipowerproducts.co.uk
01646 687 880
sales@hyundaipowerproducts.co.uk
41
Advertisement
Table of Contents
