Preparation; Adding Oil; Checking Oil Level - Hyundai HYT150 Instruction Manual

Petrol rotavator/tiller
Hide thumbs Also See for HYT150:
Table of Contents

Advertisement

Preparation

!
CAUTION - Do not make any adjustment to the machine without stopping the engine first.
Running the engine with low oil level will cause serious engine damage.

Adding Oil

Oil Type : SAE 30 or 15w40 Engine Oil
Oil Capacity : 0.4L
NOTE - The machine is delivered without oil in the engine. All machines are tested and inspected
so there may be some residual oil left in the machine so please fill with caution.
1
Remove the oil filler cap.
2
Fill with fresh SAE 30 or 15W40 engine oil to the upper mark on the
dipstick. DO NOT overfill.
3
Once the correct amount of oil has been added, refit the dipstick securely.

Checking Oil Level

1
Remove the oil filler cap and wipe the dipstick clean.
2
Refit the dipstick without screwing it down. Remove the dipstick and check the oil level. It
should be to the middle of the dipstick.
3
If the oil level is too low, add SAE 30 or 15W40 engine oil to the upper mark on the dipstick.
DO NOT overfill. The oil level should not be above the upper mark on the dipstick.
4
Once the correct amount of oil has been added, refit the dipstick securely.
26
www.hyundaipowerproducts.co.uk
01646 687 880
sales@hyundaipowerproducts.co.uk

Advertisement

Table of Contents
loading

Table of Contents