Advertisement
Quick Links
PARTS LIST CALLOUTS
A
INSTALLATION
1) Loosen the thumb-screw until it becomes disengaged from the RackLink
unit (1). DO NOT fully remove the thumb-screw. The retainer washer
will hold the thumb-screw in place. Remove the RackLink
unit from the mounting bracket (2). (FIGURE A)
RACKRAIL
SLOT
(FIGURE B)
MOUNTING INSTRUCTIONS
RackLink
In-Line Models
D
B
C
™
PARTS LIST
A - RackLink Unit
B - Mounting Bracket with Factory Installed Thumb-Screw
and Integrated Retainer Washer
C - Oval Nut
D - #3 Phillips Head Screw
2) Install a screw into an oval nut as shown. Once tightened, insert the
oval nut into the slot in the rackrail bracket. Slide into the desired
location. (FIGURE B)
QTY
1
1
2
2
2
1
(FIGURE A)
I-00470
Rev -
Advertisement
Related Manuals for Middle Atlantic Products RackLink
Summary of Contents for Middle Atlantic Products RackLink
- Page 1 C - Oval Nut D - #3 Phillips Head Screw INSTALLATION 1) Loosen the thumb-screw until it becomes disengaged from the RackLink unit (1). DO NOT fully remove the thumb-screw. The retainer washer will hold the thumb-screw in place. Remove the RackLink unit from the mounting bracket (2).
- Page 2 4) Insert the flanges on the mounting bracket into the slots on the unit (3). Tighten the thumb-screw to secure the unit (4). The in-line RackLink unit can be installed with the receptacles facing out (FIGURE D) or to the side (FIGURE E).