LG DLEX7600 E Series Service Manual page 58

15. Once the top lock rod has been removed, the hinge pivot can easily be removed from the hinge assembly
on the upper left and set aside.
17. Rotate the top lock rod (removed in step 14) 180 degrees end for end from its
original position and reinstall it. The spring should now be to the right of center,
with the spring on the side of the rod facing the top of the door.
Insert the right end of the lock rod into the right hinge assembly. Make sure the rod
is aligned with the guides in the door panel.
When released, the lock rod should slide completely into the hinge assembly on the
right. Slide the lock rod back and forth to make sure it is correctly positioned in the
guides and slides easily.
16
Carefully lift the upper hinge assembly (on the left) out of the outer
the hinge assembly 180 degrees and install it on the upper right side
assembly.
The hinge pivot removed in step 11 will be installed later.
left side of the door.
58