Access Codes; Phone Password - Samsung SGH-E710 User Manual

Solving Problems
The phone starts beeping and
"**Warning** Low battery" flashes on
the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
( ); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Contacts entry
• Check that the number has been stored correctly,
by using the Contacts Search feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
162

Access Codes

There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
When requested for any of the codes explained
below, enter the appropriate code (displayed as
asterisks) and press the Centre key or Ok soft key.
If you make a mistake, press the C key one or more
times until the incorrect digit is cleared and then
continue entering the correct code.
The access codes, except for the PUK and PUK2
codes, can be changed using the Security menu.
See page 119 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not accidentally dial an
emergency number.

Phone Password

The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
preset to "00000000" at the factory.
To See
activate/deactivate the page 120.
Phone Lock feature
change the phone page 121.
password
163