Parrot Sequoia User Manual page 11

Sunshine sensor
The sunshine sensor is used to calibrate the images depending on the
sunlight. This makes it possible to compare photos over time, despite
variations in light during photo shoots. The sunshine sensor is attached
on the upper part of the drone, facing the sky. During flights the
sunshine sensor is powered by the multispectral sensor.
It is recommended to use a TS32GSDU3X SD card with
!
Sequoia. Performances are not guaranteed for other SD cards.
Check SD card compatibilities on www.parrot.com/entreprises/
sequoia.
1
3
4
4 ambient light sensors. These sensors are fitted with band-pass
1
filters identical to those on the multispectral sensor.
Slot for an SD card.
2
Indicator light: Reference for calibration and indicates if GPS/
3
GNSS is enabled.
USB device port
4
multispectral sensor.
Other sunshine sensor features:
• GPS /GNSS module.
• Inertial measurement unit.
• Magnetometer.
• Weight: 35g.
2
: connects the sunshine sensor to the
11