Select The Mode That You Want To Use; Set Parameters For Te Mode; Set Parameters For Nt Mode - Alphatech Blue Gate ISDN BRI Brave Quick Start Manual

Set at least the following parameters:
You can assign the name
of your equipment
Blue Gate Brave1
If you want to use network connection
set all parameters.
Choose the proper Dial tone
·

Select the mode that you want to use

Suppose you set the correct switches
for connecting 100 Ohm terminal resistors
Set parameters for NT mode according
to the connected PBX.

Set parameters for TE mode

In case of Synchro mode no need to adjust
anything,no matter