Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Battery and charger sold separately.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19l
Advertisement
Related Manuals for Bauer HYPERMAX 191101C-B
Summary of Contents for Bauer HYPERMAX 191101C-B
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
table of contents Safety ............2 Maintenance ..........12 Specifications ..........7 Parts List and Diagram ......14 Setup ............7 Warranty ............ 16 Operation ............ 8 WarninG SyMBOLS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. -
Page 3: Safety
personal Safety 1. Stay alert, watch what you are doing 4. Do not overreach. Keep proper footing and and use common sense when operating balance at all times. This enables better control a power tool. Do not use a power of the power tool in unexpected situations. - Page 4 Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Drain cleaner Safety Warnings 1. Maintain labels and nameplates on the tool. 12.
- Page 5 20. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
- Page 6 Grounding tO prEVEnt ELEctric SHOcK anD DEatH FrOM incOrrEct GrOunDinG: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged.
-
Page 7: Specifications
Specifications Battery Type 20V Bauer Li-Ion Charger Type 20V Bauer Li-Ion Cable Size Ø1/4" x 23' L Drain Pipe Capacity 3/4" to 2" Setup - Before use: Functions rotation Feed Switch Handle Feed indicator trigger Handle cable Work Drain plug... -
Page 8: Operation
Operating instructions read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the trigger is in the off-position and remove the Battery pack before performing any procedure in this section. - Page 9 Work area Set up 1. Verify that work area has adequate 6. If necessary, remove fixture (toilet, sink, etc.) to lighting for the job. allow access to the drain. Do not feed the cable through a fixture. This could damage 2.
- Page 10 General Operating instructions 1. Make sure that the Trigger is in the 6. As you feed Cable, you may feel and see off-position, then attach the Battery Pack. Cable slow down and/or start to wind or load up (a “twisting” or “squirming” motion). This may 2.
- Page 11 cleaning the cable 1. Thoroughly flush Drain Cleaner Cable with 4. Remove the Drain Plug and tilt the clean water after every use. Doing so will Drain Cleaner backward to allow any help prevent the build-up of sediment and any remaining fluid to drain out of the Drum.
-
Page 12: Maintenance
Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the trigger is in the off-position and remove the Battery pack before performing any procedure in this section. tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE: Do not use damaged equipment. - Page 13 troubleshooting problem possible causes Likely Solutions Motor shuts off 1. The motor may have been shut off 1. Turn Rotation Switch to OFF. Allow motor to during use. by its internal thermal protection cool off completely before restarting and stay switch, or auto reset breaker.
-
Page 14: Parts List And Diagram
parts List and Diagram parts List part Description part Description Screw M6×60 Nut M6 Flat Washer 6 Motor Pressing Plate Bearing Left Housing Screw ST2.9×12 Feed Indicator Connector Left Feed Handle Screw M3×5 Steel Ball Ø5 Reduction Gearbox Spring Connector Head Pin Ø6×53 Washer Fixed Bearing Base... - Page 15 Item 64483 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the HYPERMAX 191101C-B and is the answer not in the manual?
Questions and answers
the cable broke inside drum how to repair
To repair a broken cable inside the drum of a Bauer HYPERMAX 191101C-B:
1. Disconnect the battery pack to prevent accidental operation.
2. Do not use the motor to extend or retract the cable during replacement.
3. Manually pull the old cable out of the drum until the connection to the drum cable is accessible.
4. Remove the cable screw from the drum cable to separate the old cable.
5. Connect the new cable to the drum cable using the cable screw.
6. Manually feed the new cable back into the drum without applying excessive force.
This answer is automatically generated