Advertisement
1. Please turn off the
2. Open the camera's battery
camera.
chamber. Carefully remove
the battery chamber cover
by gently pulling while it is
aligned at a 35˚angle.
Refer to your camera's
instruction manual for
more information.
3. Store the camera battery
4. Align the grip with the
chamber cover in the Camera
Battery Compartment Cover
Slot (11) on the grip.
5. Turn the Attachment
camera paying attention
Wheel (10) in the direction
to the Power Contacts (2)
of the LOCK arrow to
which go straight into the
securely fasten the power
camera's battery chamber.
grip to the tripod mount
Also align the Attachment
on your camera.
Screw (3) with the camera's
tripod socket.
6. Connect the included Signal
Cable (12) to the battery
grip using the Signal Cable
Socket (5). Connect the
other end of the cable to
the T6's accessory terminal.
Advertisement
