Clock Factory Restart; Projection Alarm Clock; How Tall Are The Time Numbers; 12-Hour Or 24-Hour Time Format - La Crosse Technology W85923 Faqs

Clock Factory Restart

1. Remove batteries and a/c power from the clock.
2. Press one of the buttons on the clock at least 20 times to clear all memory. Verify that the
clock is blank before proceeding.
3. Let the clock sit with batteries out for at least 10 minutes.
4. Insert the a/c power cord or fresh alkaline batteries in the clock.

Projection Alarm Clock

How tall are the Time Numbers?

 The time numbers are 1.25 inches tall.

12-Hour or 24-Hour Time Format

 Display the time in 12-hour or 24-hour format
 Default is 12-hour time.
 Use the
Program Menu

Power Requirements

 This clocks powered by a 4.5 volt a/c power adapter
 Alternatively, optional 2-AAA alkaline

Fahrenheit/Celsius

 Be sure the Time is showing on the clock.
 Press and release the SET button to switch between Fahrenheit and Celsius for the indoor
temperature reading.

Inaccurate Indoor Temperature Reading

 Look for heat sources such as sunlight, door or window frames, or reflected heat of cold.

Minimum/ Maximum Indoor Temperature Reading

 Press and release the MAX/MIN button to view the indoor temperature minimum then
maximum readings.
 Reset the indoor minimum temperature by selecting minimum temperature, and then hold the
DOWN button.
 The temperature will show dashes briefly then show current temperature as the new
minimum.
 Reset the indoor maximum temperature by selecting maximum temperature, and then hold
the DOWN button.
 The temperature will show dashes briefly then show current temperature as the new
maximum.

Projection

TIME will project continually when operating with the a/c power cord. This is the constant item to
be projected. There is not an option to project indoor temperature.
Note:
 YEAR will project for about 30 seconds when in Calendar mode.
 ALARM TIME will project for about 30 seconds when in Alarm mode.
Battery Operation: Press and release the SNOOZE/LIGHT button to show the projection for 3
seconds.
Note: Projection will not display constantly when operating on battery power.
A/C Operation: Projection will display constantly.
La Crosse Technology, Ltd.
to switch time formats.
batteries
Page 2