Matrox Maevex Series User Manual page 29

In the
5
For more information on configuring your Windows firewall, see your network
administrator.
54 Matrox Maevex Series – User Guide
– Under the remote IP address, add the IP range you want to use for your
Scope
encoders. You can use a range (such as 192.168.1.0/24) or a single IP address (such
as 192.152.168.62).
– Select
Action Allow the connection
– Select the network location of your system (
Profile
– Enter the name for your rule (such as Maevex Encoder Recording – TCP rule).
Name
panel, click
Actions New Rule
– Select
Rule type Custom
– Select
Program All programs
– Under
Protocol and Ports
– Under the remote IP address, add the IP range you want to use for your
Scope
encoders. You can use a range (such as 192.168.1.0/24) or a single IP address (such
as 192.152.168.62).
– Select
Action Allow the connection
– Select the network location of your system (
Profile
– Enter the name for your rule (such as Maevex Encoder Recording – ICMPv4
Name
rule).
.
. Configure the new rule with the following settings:
.
.
, select
Protocol type
.
, , or
Domain Private
.
ICMPv4
, , or
Domain Private
).
Public
).
Public