Table of Contents
Advertisement
-Type : Dual amplified Bookshelf (one side passive)
- LF Driver : 4
inch Polypropylene curved cone
surround.
-HF Driver : 1 inch magnetically shield natural Silk Dome.
- Frequency Response: 100Hz - 22kHz
- Crossover Frequency: 4.1kHz
- Amplifier Power: 20W x 2
-S/N Ratio: > 100dB below full output, 20 kHz Bandwidth
-Input Connectors: 2 x TRS Balanced/ Unbalanced Input Connectors (L/R)
-Polarity: Positive signal at + input produce outward LF cone displacement
- Input Impedance: 20k ohms balanced, 10k ohms unbalanced
- Input Sensitivity: 200 mV input produces full output with Volume control at maximum.
- Protection: RF interference, output current limiting, over temperature, turn-on/off
transient, subsonic filter, external mains fuse.
-Indicator: Power ON/OFF indicator on front panel
-Power Requirements: Factory programmed for either 115V ~50/60Hz, or
-Cabinet: vinyl laminated MDF
-Dimension: 206mm(H) x 136mm(W) x 149mm(D)
Remarks: Above specifications are subject to change without notice.
Technical Specifications
with high temperature voice coil and damped rubber
230V~50/60Hz
Power via detachable 3 circuit line cord.
8
Advertisement
Table of Contents
