Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ESI uniK 08
Summary of Contents for ESI uniK 08
- Page 1 Professional Active Reference 8” Studio Monitor User’s Guide...
- Page 2 ESI - Copyright © 2012 Revision 2, April 2012 www.esi-audio.com...
-
Page 3: Table Of Contents
uniK 08 INDEX 1. Introduction..........................4 2. Basics & Installation ........................4 Unpacking / Handling ..............................4 Connection ................................. 4 3. Placement............................5 Stereo / 2.0 Positioning .............................. 5 Stereo with Subwoofer / 2.1 Positioning........................5 5.1 Positioning ................................6 7.1 Positioning ................................ -
Page 4: Esi Unik
08 1. Introduction Congratulations on your purchase of the ESI uniK 08. uniK 08 are the result of extensive development work done in Germany, to provide a professional active reference monitor that defines a new level of quality in this class. The monitor features a new 8"... -
Page 5: Placement
uniK 08 3. Placement The placement of monitoring speakers is very critical and can compromise their performance. This is a general rule for every loudspeaker. To monitor with uniK 08 utilizing their maximum capabilities, an appropriate listening environment and a correct placement are important. Typically you would be using 2 units of uniK 08 as one stereo pair –... -
Page 6: Positioning
uniK 08 5.1 Positioning In a 5.1 surround set, the center speaker should ideally be placed on top of the subwoofer. If this is not possible, the subwoofer can be moved to the left or right but should be as close as possible. The rear surround speakers should be positioned around 110°... -
Page 7: Orientation
uniK 08 Orientation It’s very important to place the uniK 08 vertically. Never place them horizontally. Comments Please also make sure to not place any obstacles that may block the flow of air or that could generate sound reflections (especially highly reflective material including glass or metal) in front of the monitor. -
Page 8: Rear Panel
uniK 08 Rear Panel 1. XLR input – this connector accepts balanced XLR input connections (optimised for +4dBu). XLR input is wired like this: INPUT SIGNAL XLR CONNECTIONS PIN 2 PIN 3 Shield PIN 1 2. TS input – this jack accepts TS input connections, unbalanced (optimised for -10dBV). The TS input is wired like this: INPUT SIGNAL TRS CONNECTIONS... -
Page 9: General Information
The connector contains a replaceable fuse (T2AL/250V). 5. General Information Trademarks ESI, uniK and uniK 08 are trademarks of ESI Audiotechnik GmbH. Other product and brand names are trademarks or registered trademarks of their respective companies. Correspondence For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at www.esi-audio.com. - Page 10 uniK 08...