Table of Contents
Advertisement
endure impacts from inside under extreme conditions. It employs high-density special MDF and
unique interior reinforcement to provide more stable performance.
5. N
& P
ETWORK
Network & Power Amplifiers for nEar04 are specially designed for its own woofer and tweeter.
Network distributes low, mid, and high frequency properly to units in order to reduce loss of
sound and distortion achieving natural balance of the sound.
For optimal performance of nEar04, read below thoroughly and carefully before starting
installation.
1. P
RECAUTIONS
Handling
Do not grab the speaker driver units: nEar04 is packaged in box fitted tight, so your attention is
required when taking speakers out of the box. To avoid the possible damage to the speaker units,
hold both sides of the speaker to pull it out of the box. The speaker units should not be touched
to avoid damage even after it is out of the box.
Recommend to use high quality balanced or unbalanced cable for input connection.
Turn off the power of nEar04 and turn Volume Control of nEar04 to minimum before
connection.
Connection
Use the speaker wire included in the nEar04 package to connect the Right and Left Speakers via
the spring terminals.
2. TRS B
ALANCED
Assure that power switch of nEar04 is turned off and Volume Control of nEar04 is turned to
minimum. Connect the male side of TRS balanced or unbalanced cable to the TRS input of Left
speaker of nEar04. Refer to the following diagram.
A
OWER
MPLIFIERS
Installation
/U
C
NBALANCED
ONNECTION
3
Advertisement
Table of Contents
