Page 1
How to upgrade the Software Connect the AC power and turn “ON” the TV receiver. The USB reader is located on the left or right of the cabinet near the side control/jack assembly as shown in Figure1. Figure1 Insert the “USB Drive” into the USB slot as shown in Figure2. Figure2 After insertion of USB Drive into reader slot a firmware upgrade information window will appear as shown in Figure3.
Page 2
Start the software upgrade by using the “left or right arrow” key of the remote control to select “Yes”. Press “OK” key of the remote control to begin the upgrade. The software upgrading process will begin. During the software upgrade, the TV receiver will display “Updating…...
This manual is also suitable for:
32sl833g37sl833g55zl1g47vl863f42sl863f55zl1f...
Show all