Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Phase-Tech OS-440
Summary of Contents for Phase-Tech OS-440
- Page 1 OS-440 APP GUIDE Rev 4.24.2019...
- Page 2 WiFi network. 2. When you first open the ‘MSE OS-App’, the main screen called ‘My Devices’ will be blank. To add your OS-440 amplifier that is connected to a WiFi network tap ‘NEW GROUP’ on the bottom of the page. Select the amp and tap ‘NEXT’.
- Page 3 3. Your OS-440 will now be shown on the ‘My Devices’ screen. Tapping the ‘EDIT’ button in the top right corner opens access to the ‘EQ SETTINGS’ (‘EQ’ button), ‘Device Settings’ (Gear symbol button), and an option to remove the OS-440 amp being controlled (Notepad symbol and Trashcan symbol to confirm).
- Page 4 1. Please reference the OS-440 Setup Guide for setup WiFi network setup instructions. 2. With multiple OS-440 amplifiers setup on a WiFi network, the ‘MSE OS-App’ can be used to setup groups as well as zones that can be controlled using the app.
- Page 5 4. Adjust the settings for each of the OS-440 amps in the group; change the EQ, set to Bridged, etc. When ready, tap ‘DONE’ and then tap the record or album cover to access audio files local to your mobile device or to change source input.
- Page 6 ‘MSE-OS-App’ on your mobile device connected to your OS-440 WiFi Direct. 2. The ‘MSE OS-App’ functions the same in Wi-Fi Direct mode as it does with the OS-440 connected to a WiFi network. There is no internet access while setup in WiFi Direct.
- Page 7 7. It may take a few moments for the OS-440 amplifiers to connect using the Master OS-440’s WiFi Direct signal. Once connected, all the amps will have a solid purple WiFi LED. 8. Reconnect to the Master OS-440 amplifier in WiFi Direct mode and the Slave OS-440 amplifier will be visible in the MSE OS App.
- Page 8 9. Press ‘EDIT’ on the My Devices page, select the Master OS-440 amp, and then press the + symbol next to the Slave OS- 440 amp. 10. Press the ‘DONE’ button and you are now ready to play audio to both OS-440 amplifiers connected in Master/Slave mode.
Need help?
Do you have a question about the OS-440 and is the answer not in the manual?
Questions and answers