1. Manuals
  2. Brands
  3. Phase-Tech Manuals
  4. Amplifier
  5. OS-440
  6. Setup manual

Phase-Tech OS-440 Setup Manual

Hide thumbs Also See for OS-440:
Table of Contents

Advertisement

Quick Links

Download this manual
|
OS-440
SET-UP GUIDE
Rev 6.6.2019

Advertisement

Table of Contents
loading

Related Manuals for Phase-Tech OS-440

Summary of Contents for Phase-Tech OS-440

  • Page 1 OS-440 SET-UP GUIDE Rev 6.6.2019...
  • Page 2 The ideal location for an OS-440 is inside a cabinet. The OS-440 is not waterproof. If you do not have a dry, protected spot for the OS-440, we recommend using a weatherproof box to mount the amp on an exterior wall.

  • Page 3: What's Included

    What’s Included 1. OS-440 Amplifier (QTY 1) 2. Tri-band Wireless Antennas (QTY 2) 3. Euroblock Connectors (QTY 2) 4. Screwdriver (QTY 1) 5. Screws (QTY 8) 6. Zip Ties (QTY 3)
  • Page 4 Physical Setup Guide 1. Plug AC power in to amplifier. Power should be solid green and WiFi/Bluetooth indicator is yellow. The amp is booting and Wifi/Bluetooth light will flash green once it’s complete. 2. Screw the antennas onto the amplifier. 3.

  • Page 5: Software Specifications

    1. When you first power on your OS-440, and a network is not yet configured, the OS-440 will automatically trigger a ‘Hot Access Point’. 2. After booting, you will see a green power light indicator and the “Wi-Fi” light will be flashing green. The OS-440 is now ready for Wi-Fi pairing.
  • Page 6 5. Tap ‘Next; at the bottom right corner to proceed with the setup of the OS-440. Then, to confirm that the pairing of the OS- 440 was successful, Google Home will play a sound through the device. If you hear the sound, tap ‘Yes’ at the bottom right corner to proceed to the next step.

  • Page 7: Section 2: How To Configure Your Os-440 On Bluetooth

    8. Set up is now complete and you are ready to start using your OS-440. You can now play music through your preferred music platform (Amazon, Pandora, Spotify etc.) by utilizing the ‘Cast’ feature in each program. 9. If you ever need to change the network that your OS-440 is connected to: 9.1.

  • Page 8: Section 3: How To Connect A Hardwired Device To Your Os-440

    2. The OS-440 will reboot automatically and the Wi-Fi/Bluetooth LED will blink green once complete. 3. The OS-440 is now reset to factory settings and is ready to be set up. Please refer to Section 1 at the beginning of this manual.

  • Page 9: Important Safety Information

    IMPORTANT SAFETY INFORMATION 1. Read these instructions. 2. Keep these instructions. 3. Heed all warning. 4. Follow all instructions 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions. 8.

  • Page 10: Información De Seguridad Importante

    INF OR MACIÓN DE SEGURIDAD IMPORTANTE 1. Lea estas instrucciones. 2. Guarde estas instrucciones. 3. Preste atención a todas las advertencias. 4. Siga todas las instrucciones 5. No use este aparato cerca del agua. 6. Limpie solo con un paño seco. 7.

Table of Contents