Application Examples - Honeywell 032211.17 Manual

22
5.

Application examples

Both ranges of sensor function basically in the same way. The following examples
can therefore apply to both ranges of sensor.
Exception: Lock monitoring. With IDENTLOC sensors, a contact is on the handle,
with slimline sensors, the connecting rod is required in case of multiple locking.
5.1 Doors and windows
To the control panel
Connections1 to 4: IDENTLOC sensors
Connection 5:
1
2
3
IDENTLOC
4
EU
5
Passive glass breakage
sensor
Fixed window
5.2 Lock monitoring
To the control panel
Locking sensor
slimline
1
IDENTLOC 2
EU
Connecting rod
of multiple locking
At an IDENTLOC sensor, a contact that is located at the
window or the door handle can be connected parallel to the
sensor antenna.
Data transmission does not take place until the window wing is
closed and the window handle is locked.
With multiple locking, slimline
sensor or locking sensor depending on the type of connecting
rod).
Differential detector group with clear function
Alarm glass sensor with
monitoring of opening
Lock monitoring
Sliding door with alarm glass
(e.g. alarm glass spider)
Glass breakage sensor with
monitoring of opening
Window handle
lock monitoring
sensors are used (opening
Mounting and Connection Instructions IDENTLOC Evaluation Unit
Glass breakage sensor
with monitoring of opening
Glass breakage sensor with
monitoring of opening
Window handle lock
monitoring
Movable window wing
5.3 Lock monitoring with
additional roller bolt lock
To the control panel
1
IDENTLOC
2
EU
5
Lock
monitoring
With an additional roller bolt lock, a contact at the roller bolt
can be used for lock monitoring.
Skylight
Opening sensor
Door without glass
insert
2 glass breakage sensors with
monitoring of opening
12k1