Advertisement
USB/SD Card Playback
You can play music from USB stick or SD Card using the USB/SD slot on the PA
speaker.
1. Turn ON the unit.
2. Insert your USB or SD card into the slot.
3. Once inserted the USB or SD card unit will begin automatic play.
4. You can use the PRE/NEXT/PLAY/PAUSE to control and play music.
Notes:
The speaker system can play the following audio le formats: MP3, MP4, WMA.
The USB/SD Card no more than 32GB. Operation may be slower when searching
large memory les. It will need several seconds to respond when your USB/SD
Card is full of contents.
Wireless BT Playback
You can connect your Wireless BT phone or other devices to the PA speaker.
1. Turn ON the unit.
2. Press the INPUT button which located on top control panel, near the USB/SD slot.
3. The Wireless BT is active when you hear two "tone" indicator sound.
4. Use your Wireless BT phone or other devices to search for the PA speaker. It will be
displayed as PYLE SPEAKER.
5. Connnect your devices with PYLE SPEAKER, it will pair with unit automatically.
6. You do not need code and get connected with unit.
7. Play music on your phone or device, sound will come from the speaker through
the Wireless BT connection.
8. You can use the VOLUME to adjust the sound level for Wireless BT, also you can
adjust the Wireless BT music sound through your own phone or other device.
Notes:
If there is no sound through the PAspeaker during Wireless BT, Check the volume
controller both on the unit and on your phone or other device.
www.PyleUSA.com
5
Advertisement
