Advertisement
Instructions
Power ON/OFF
The PA speaker can be powered when connected to main power or using the
internal 9V battery.
1. Connect the power cable to the top of the unit.
2. Connect the other end of power cable to main power.
3. Turn ON the switch for the main power.
4. The unit will automatically power ON when connected to main power.
Notes:
If you wish to use the internal battery to power the unit, just simply turn on the Battery
switch located on the top of unit to ON.
Charging
Before using the PA speaker for the rst time, charge the unit at least 8 hours.
1. Connect the power cable to the top of the panel.
2. Turn o the battery switch on the top of the panel.
3. Recharge indicator light will light when unit is charging.
Notes:
The internal battery will charge while the unit is being operated and the power
switch is ON. It is better to charge the unit while the power switch is o .
Using the Wired Microphone
You can connect the wired microphone to this unit using the MIC INPUT located
on the top of control panel.
1. Turn OFF the unit.
2. Connect your wired microphone to the MIC INPUT located on top of the control
panel.
3. Adjust the microphone volume by tuning the MIC VOL/ECHO knobs located on
top control panel.
Notes:
You can use the wired microphone and wireless microphone at the same time.
Connecting a Guitar
You can connect your Guitar to unit using the 1/4" GUITAR INPUT plug.
1. Turn ON the unit.
2. Connect your guitar cable to GUITAR INPUT port on top control panel.
3. Adjust the volume by turning the GUITAR VOL on top control panel.
4
www.PyleUSA.com
Advertisement
